不锈钢纤维网对热压铁基预合金胎体抗冲击韧性的影响          下载免费PDF全文

孙吉伟  吴海霞  沈立娜  杨甘生 《探矿工程》2020,47(2):73-77

针对孕镶金刚石钻头在孔底钻进时受到各种冲击力而导致胎体出现裂纹甚至断裂的问题，提出了应用不锈钢纤维网提高胎体抗冲击韧性的方法。通过控制纤维网的摆放位置、目数和层数3个变量，测试了不同组合变量下的胎体抗冲击韧性。通过试验得到：（1）不锈钢纤维网能有效提高胎体的抗冲击韧性，而且X轴位置效果更好；（2）当纤维网的目数相同时，胎体抗冲击韧性随纤维网层数的增加而减小；（3）在纤维网层数相同的情况下，随着纤维网目数的增加，胎体抗冲击韧性呈现先增大后减小的趋势。当添加30目单层纤维网时，胎体的抗冲击韧性达到最大值。通过观察冲击断口、分析胎体断裂机理，解释了出现这种规律的原因，并提出了进一步优化胎体抗冲击韧性的方法。  相似文献   

一种基于Fréchet距离的断裂等高线内插算法     

郝志伟  李成名  殷勇  武鹏达  吴伟 《测绘通报》2019,(1):65-68,74

等高线内插是提高地形图精度的一个常用手段，在地图综合等领域中有很重要的作用。在实际地形图数据库中，等高线除了存在完整的计曲线以外，还有一部分断裂的首曲线。已有的等高线内插研究中未考虑对此类数据的处理，为此，本文提出了一种基于Fréchet距离的断裂等高线内插算法。首先提出了等高线度量关系的计算方法，然后对等高线的节点均匀加密，并利用Fréchet距离进行相似度判断以选择参考等高线，最后根据“最近点”的方式进行插值。通过对江苏某地区实际数据的试验，验证了该算法的合理性，对于鞍部地区的内插，有更好的适应性和准确性。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China     

FAN Cunhui  HE Shun  ZHANG Yu  QIN Qirong  ZHONG Cheng 《《地质学报》英文版》2018,92(6):2351-2366

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.  相似文献   

极地深部冰层取心钻探孔壁水压致裂研究          下载免费PDF全文

张晗  陈晨  Pavel Talalay  毛建设  刘书源  靳成才  宛召 《探矿工程》2018,45(11):5-11

为了维护极地深部冰层取心钻探工作中钻孔的稳定,避免孔内事故的发生,冰层孔壁的水压致裂问题是亟待解决的重要科学问题之一。本文在深入分析国内外冰层钻探资料的基础上,结合冰盖动力学相关理论,计算得出了钻孔所在区域冰层的密度、温度及内部应力随深度的变化规律。在此基础上,结合油气资源勘探水力压裂技术与冰层钻进钻井液等相关理论,建立了合理的孔壁压差计算方法,深入探讨了适用于深部冰层钻探孔壁水压致裂机理。研制了冰层钻孔水压致裂模拟实验装置,可分析研究不同围压条件下冰样的脆性变形机理。结合我国Dome A深冰心钻探工程实际,提出钻孔可能发生水压致裂的深度区域及孔壁所需的起始裂纹长度判定,以期为后续的安全高效冰层钻进提供重要的理论依据。  相似文献   

页岩压裂影响因素三维模型数值分析     

张健  张国祥  王金意 《江苏地质》2018,42(1):127-130

不同影响因素对页岩水力压裂效果有不同的影响。基于三维数值计算模型介绍了水力压裂的典型过程,针对水平最小主应力、页岩的弹性模量和渗透系数对压裂的影响进行了分析。结果表明:随着水平最小主应力的增加,裂缝高度也随之增加;随着页岩的弹性模量增加,裂缝的高度随之降低;随着渗透系数的增加,裂缝高度也随之增加;随着压裂液的黏度系数提高,裂缝的高度降低。  相似文献   

Faults in the Baikal region: morphostructural and structure-genetic features (case study of the Buguldeika fault junction)     

A.V. Cheremnykh  A.S. Cheremnykh  A.A. Bobrov 《Russian Geology and Geophysics》2018,59(9):1100-1108

Lineament analysis is applied to map the pattern of the Obruchev fault system in the Buguldeika Village area, where several fault zones (Olkhon, Primorsky, Prikhrebtovyi, Buguldeika, and Kurtun) make up a junction. As inferred from the predominant directions of genetically related lineaments, the Olkhon, Primorsky, and Prikhrebtovyi faults originated under NW-SE extension and compression. The extension and compression settings within these zones are reconstructed by analysis of lineaments that have prominent and poor geomorphic expression, respectively. However, the pattern of lineaments well expressed in the surface topography within a weakly deformed block corresponds to reverse slip, while that of poorly pronounced lineaments corresponds to left-lateral strike slip. The study confirms the idea that the latest extension (rifting) stage in the Baikal region reactivated fault zones but did not deform blocks. The blocks store record of residual deformation produced by previous settings of regional compression and shear. The obtained results agree with earlier tectonophysical analysis of faults and fractures in the area and prove the applicability of the suggested approach to map the fault patterns and reconstruct their respective stress settings in areas that underwent multiple deformation events of different ages.  相似文献   

油源断裂输导油气通道演化形式的研究方法及其应用     

付广  沙子萱  王宏伟  姜文亚  董雄英 《地质科学》2022,57(1):127-138

为了研究含油气盆地下生上储式油源断裂附近油气分布规律,在不同时期油源断裂输导油气通道及影响因素研究的基础上,通过确定油源断裂伴生裂缝可能发育部位和地层脆性发育部位,识别其活动期输导油气通道。通过断裂填充物泥质含量和填充物输导油气所需的最小泥质含量,识别其停止活动后输导油气通道,二者结合建立了一套油源断裂输导油气通道演化形式的研究方法,并将其应用于渤海湾盆地冀中坳馅廊固凹陷大柳泉地区旧州断裂在沙三中-下亚段内输导油气通道演化形式的研究中,结果表明:旧州断裂在沙三中-下亚段内共发育4种输导通道演化形式,其中一直输导通道演化形式仅分布在F;断裂东部局部和F;断裂的东部端部;先输导后不输导通道演化形式主要分布在F;断裂西部、F;断裂中西部及东部和F;断裂处;先不输导后输导通道演化形式主要分布在除东部局部的F;断裂、F;断裂的中东部;一直不输导通道演化形式主要分布在F;断裂中部、F;断裂和F;断裂交界处及F;断裂东部。一直输导和先输导后不输导通道演化形式分布处或附近应是沙三中-下亚段油气成藏的有利部位,与目前旧州断裂附近沙三中-下亚段已发现油气分布相吻合,表明该方法用于研究油源断裂输导油气通道演化形式是可行的。  相似文献